Write to us
Write to us

Let us reach you!

Share Your Opinions

Hydraulic Bollard


OPTIMA that has adopted it as its principle to keep customer satisfaction on the forefront by launching the products whose quality standards are at utmost levels on the markets is always there for you with its after-sale support services.

Get Offer

Hydraulic Bollard | HRB-PROTECTOR

Hydraulic Bollard
Hydraulic Bollard
Download Brochure


Optima HRB-PROTECTOR series hydraulic crash tested retractable bollards are especially designed for entrances that have very high security requirements to keep vehicle access under control. In addition to the control of vehicle access in high security applications, if there is a threat of vehicle attack from high tonnage vehicles with high speeds, it is not possible for the vehicle to keep on moving forward anymore beyond the bollards as crash tested bollard destroy the vehicle completely.

Optima crash tested protector series bollards are designed for ASTM F2656M-15 crash rating (equivalent to PAS68, K12). Actual test was fully successful and the product is certified according to ASTM F2656M-15 (grade P1, zero penetration). Even after the crash, Optima HRB-PROTECTOR bollard was still operational.

The drive unit is hydraulic, but in case of power failure hydraulic bollard can be lowered or lifted manually with the help of manual hand pumps. With the help of PLC controlled electronics, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green lights can be integrated to the system.


Test parameters

ASTM F2656M-15 M50, P1

Equivalent to

K12, M50, PAS68, IWA14-1

Axle load resistance

50 tons


Heavy duty

Top plate

Sand blasted aluminum with flashing light around

Type of steel

S275 (inner core), finishing 316 stainless steel sleeve

Traffic light

Red/green LED, 200 mm diameter, steel post 2 m height and electrostatic powder coated


380 V, 3 Phase, 50-60 Hz (or 220 V/ 440 V etc., three phase, 50-60 Hz optional by a transformer)

Power failure

Manual hand pump, (or Hydraulic accumulator, DC motor and batteries or UPS (optional))


3-5 seconds, in emergency 1.5 seconds (optional)

Desktop keyboard

Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator

Extra I/O at the PLC

Enough I/O’s to connect any card reader, extra override keyboard etc. later on

Proximity sensor

Available to sense the position of the bollard

Dual vehicle safety loop detector

This detector is used for safety

Motor Power

Min 4 KW, 1500 rpm

Environmental conditions

-25 °C and +65 °C, %95 non-condensing humidity

Environmental conditions (optional)

-40 °C and +70 °C, %95 non-condensing humidity


Hydraulic Bollard