EN العربية
Get Offer
About Our Products
x

Let us reach you!

Share Your Opinions

Electromechanical Arm Barrier With Tyre Killer (Surface Mount) | BTK-300SM/BTK-600SM

Request
Support

OPTIMA that has adopted it as its principle to keep customer satisfaction on the forefront by launching the products whose quality standards are at utmost levels on the markets is always there for you with its after-sale support services.

Get Offer

Electromechanical Arm Barrier With Tyre Killer (Surface Mount) | BTK-300SM/BTK-600SM

Download Brochure

GENERAL INFORMATION

Optima BTK-300SM / BTK-600SM are the best option when Electromechanical Arm Barrier With Tyre Killer ( Surface Mount ) demanded to be operated together. Instead of having two different products, we combined them under same cabinet which enables to reduce the costs significantly. Other characteristics are same as standard electromechanical barrier.

Optima B series electromechanical barriers with tyre killers are designed for high flow traffics. Compare to the standard parking barriers, Optima electromechanical barriers with tyre killers are suitable for harsh environments and intensive usage. With the help of strong electric motor, barrier can resist hottest environmental conditions even it is used continuously. Another strong advantage of Optima barriers is smooth operation by frequency controller which supplies slow start/slow stop operation. This type of operation increases the mechanism usage life significantly.

Optima BTK-SM series surface mount electromechnical arm barrier with tyre killers are suitable solutions for places in which digging the ground is not possible. The barrier with the tyre killer does not have any depth. It can be placed to the ground directly if the ground is strong enough.

The drive unit is electromechanical, but in case of power failure barrier can be lowered or lifted manually with the help of release gear mechanism. With the help of controlled electronics, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green lights can be integrated to the system.

STANDARD FEATURES IN BTK-300SM / BTK-600SM SERIES

Arm width

For BTK-300SM: 2-4 m, For BTK-600SM: 4-6 m

Environmental durability

Galvanized steel plate, RAL2004 powder coated, furnaced

Axle load

22 tons

Type of steel

For the cabinet :DX51D+Z (Galvanised steel)

For teeth and top plate: S235

Traffic light

Red/green LED, 200 mm diameter, steel post 2 m height and electrostatic powder coated

Power

220 V, 1 Phase, 50-60 Hz

Power failure

Release gear by Allen key, (or UPS optional)

Speed

For BTK-300SM 3 seconds, For BTK-600SM 6 seconds

Push button box

Raise, lower, stop (optional)

Extra I/O

Enough I/O’s to connect any card reader, extra override keyboard etc. later on

Proximity sensor

Available to sense the position of the barrier

Dual vehicle safety loop detector

This detector is used for safety (Optional)

Motor Power

550 Watt

Environmental conditions

-15 °C and +65 °C, %95 non-condensing humidity

GET OFFER FOR